Services
Sheet to surface
STEELX is a stainless steel surface workshop. Coating, cutting, forming and finishing are carried out in-house, so a single sheet can move from mill finish to installed architectural surface without leaving our control.
Index






01 — PVD Coating
Physical Vapour Deposition bonds a titanium-based film to stainless steel inside a vacuum chamber. The colour is metallurgical, not painted — it cannot peel, and it holds its tone under UV, salt air and daily contact.
- Chamber
- 2500 × 1500 mm
- Film
- 0.3 – 1.0 µm
- Standard
- ASTM B117 · RoHS

01
PVD Coating
Physical Vapour Deposition bonds a titanium-based film to stainless steel inside a vacuum chamber. The colour is metallurgical, not painted — it cannot peel, and it holds its tone under UV, salt air and daily contact.

02
Laser Cutting
Fibre optics cut a clean, oxide-free edge in stainless up to 12 mm. Perforated screens, jali patterns and bespoke panel geometry are cut from drawing files with no tooling cost and no distortion at the edge.

03
V-Grooving & Forming
A V-groove removes material from the reverse face so the sheet folds to a true 90° arris with no visible radius. Grooving, braking and rolling let a flat surface become a column cladding, a reveal or a box section without a weld line on show.

04
Etching & Embossing
Masked chemical etching produces matte pattern against mirror ground; rolled embossing gives relief with real depth. Both can be run before PVD so the colour follows the texture rather than sitting on top of it.

05
Mirror & Hairline Finishing
Every surface is ground and polished in stages, each one removing the marks of the last. The final pass decides how the metal holds light — a hairline that reads as fabric at distance, or a mirror that dissolves into its reflection.

06
Fabrication & Installation
Drawings are developed with the architect, panels are jigged and welded in the workshop, and the same team sets out and installs on site. Sequence, tolerance and joint alignment are resolved before anything is coated.
Colour, deposited atom by atom
Argon plasma strikes a titanium target; the vapour condenses onto the steel in a film thinner than a fingerprint. The tone is set by the gas, not by pigment.


- In-house stages
- Six
- Sheet capacity
- 3050 mm
- Finish warranty
- 10 years
Send us a drawing, or a sheet.
Request a sample or quote