Materials · 18 December 2025 · 5 min read

Large-format panels: what is actually possible

Large stainless steel sheets stacked

Everyone wants a seamless wall. What is achievable depends on three physical limits that no supplier can talk their way around.

Sheet and chamber

The uncut sheet sets the maximum seamless plane; the vacuum chamber sets the maximum coated piece.

The smaller of the two is your real limit.

Panels loaded into a coating chamber
Panels loaded into a coating chamber
Design the joint you can hold, not the seam you cannot.

Flatness at scale

Thin large panels oil-can. Bonding to an aluminium honeycomb core is the standard answer and keeps weight manageable.

Honeycomb-backed panels also install faster because they stay flat during handling.

Designing the joint

Because seamless has a limit, the joint becomes a design element. A deliberate rhythm of shadow gaps always beats a hidden joint that later shows.

Set the module from the panel size, not the other way around.

Typical max panel
1.5 × 3.0 m
Backing
Aluminium honeycomb

Set the module from the real panel limit and the wall will look designed rather than compromised.

All articles

Keep reading

Talk surfaces with us